| View previous topic :: View next topic |
| Author |
Message |
Surfsup Member
Joined: 15 Mar 2009 Posts: 39
|
Posted: Sat Jul 24, 2010 9:24 pm Post subject: Case and Head bolts |
|
|
I got a new set of Scat chomoly 8mm case and head bolts but now Im a bit confused as to the location of the bolts.
The kit I received appears to be right looking at the catalog pic.
9 Long bolts
4 short bolts
3 mid length bolts.
My problem is where the hell do they go
I think it should be :
8 long bolts along the bottom of the heads (4 each side)
4 short bolts in the middle of each head up the top (2 each side)
3 mid length bolts on the top of each head on the outside???
1 Long bolt on the top outside of a head but which one???
Its the extra long bolt where should it be and why not four mid length bolts if anyone has any idea I would appreciate the input as I want to get this together tomorrow.
Cheers |
|
| Back to top |
|
 |
DannyW Enthusiast

Joined: 27 May 2008 Posts: 97 Location: Geraldton, WA
|
Posted: Wed Aug 04, 2010 5:49 pm Post subject: |
|
|
8 long on the bottom, 2 shorter bolts either end on each side then the shortest in the middle of each side.
sometimes you get one extra long one for the recessed thread on number 3 cylinder _________________
 |
|
| Back to top |
|
 |
|